Cub Cadet Parts | Same Day Shipping (2024)

Cub Cadet Fuel Tank Assembly W/Fuel Lines Incl. 29

PartSelect Number PS11812933

Manufacturer Part Number 753-06797

The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.

Cub Cadet Grass Catcher Frame

PartSelect Number PS9988561

Manufacturer Part Number 647-04271-0637

Cub Cadet Rear Axle Assembly

PartSelect Number PS10023414

Manufacturer Part Number 911-04144B

Axle assembly attaches the rear wheels to the mower and allows the wheels to rotate.This part replaces part numbers 911-04144 and 911-04144A.Wear work gloves to protect your hands when installing this part.

Cub Cadet Edger Blade

PartSelect Number PS9129938

Manufacturer Part Number 781-0080-0637

This Edger Blade is a black, metal blade which is sold individually and comes certified from the manufacturer. Installation is rated as "Easy" and requires a socket set and wrench set. This blade attaches to the drive shaft and is used for edging the grass around driveways and walkways. If this part becomes worn/fatigued/damaged (which may happen after hitting the pavement) you will notice an odd vibration and poor trimming, at which time the part should be replaced.

Cub Cadet Element- Air Cleaner

PartSelect Number PS9903219

Manufacturer Part Number 17211-ZL8-023

This air cleaner element, also known as an air filter, is found in your lawn equipment. Typically housed in a rectangular container, it is located near the air intake area or carburetor of your machine. It keeps dust, dirt, and debris from entering the combustion chamber. If it is clogged, the restricted airflow will make the engine misfire or run poorly, and potentially cause an engine failure. To replace the element, you will need to remove its housing cover by unscrewing or unclipping it. This OEM-certified filter is sold individually.

Cub Cadet Cutting Head Assembly

PartSelect Number PS10009816

Manufacturer Part Number 753-08169

Cub Cadet Air Filter

PartSelect Number PS9117898

Manufacturer Part Number 753-05996

Cub Cadet Shear Pin, .25

PartSelect Number PS9110822

Manufacturer Part Number 738-04124A

This individually sold shear pin is an OEM replacement that is most typically used in snowblowers but can also be used within snowblower attachments for lawn tractors. Its main uses are connecting the auger and auger shaft, which are the rotating blades, and to protect more valuable components such as the transmission.If the snow is causing excessive force or there is a jam within the auger and connected housing,it will cause the shear pin to snap, effectively stopping the rotation of the auger, while the auger shaft and gears will continue turning. If the shear pin snaps, snow will simply build up on the outside of the auger housing, since the auger will no longer spin. This shear pin has a .25-inch diameter, and 1.5-inch length and is sold individually. Most augers have a pin on each side, so you may need to purchase more than one, and it is also recommended that you carry spare pins in case of a future breakage.

Cub Cadet Lawn Mower Zone Control Cable

PartSelect Number PS9180334

Manufacturer Part Number 946-1130

This zone control cable is for lawn mowers.Zone control cable stops the engine when you let go of the handle.Wear work gloves to protect your hands during this repair.

Cub Cadet Cable Barrel Holder

PartSelect Number PS9167431

Manufacturer Part Number 946-0605

This cable barrel holder is a genuine OEM part that is designed for use with tillers and snow throwers. Sold as an individual part, this holder measures approximately 1-inch in length and is used to secure the clutch control handle and cable together. This holder is made of durable plastic and can replace the old holder by simply removing it, inserting the cable into the new holder, and tightening it until it is locked in place.?